Steps On How To Change Car Tires
Having a good drive down the road then a sudden flat tire occurs can sometimes ruin the day. Don’t let it get you down though. It’s better that you be positive and just charge it to experience and get on with fixing the tire. This article will teach you how to change car tires.
Make sure that you slowly ease up to the shoulder of the road to change your tire. Make sure that you set the parking break. This is important so that you will not get sideswiped by oncoming traffic. Always keep in mind that you have to prioritize your safety first.
The hub cap of the affected wheel needs to be removed first. Use a lug wrench to loosen the lugs. Make sure that you always have a lug wrench with you in the trunk for unforeseen incidents like this. A counterclockwise motion is utilized for loosening the lugs and make sure that you do not remove them totally. Just hang on to the lugs for a few seconds while you do the third step.
It is best to know where to position your jack properly. It is best to practice caution when you are jacking up your car. Once the wheels are off the ground then remove the lug nuts.
Once you have removed the damaged tire place the new tire in its place. Put on the lug nuts after you have secured the tire in its proper place. Make sure that you do not tighten the lug nuts all the way. You need to place back the hub cap first before you start tightening the lug nuts.
These are the simple steps on how to change tires of a car. You have learned that tire changing is not difficult to do after all. Little hassles in life like a flat tire can be solved in an easy manner.
If you do end up needing a trained mechanic see our auto repair San Diego shop. We can also smog your car with our San Diego smog check service. And if you feel your brakes are having problems see us for ourSan Diego brake shop.
Tags: auto repair, auto service, brake repair, brake service